Bricks Rate in Pakistan: What to Consider While Buying [Guide]

Introduction

Whether you’re building a home, a commercial plaza, or a boundary wall, bricks remain the most essential and foundational construction material in Pakistan. Despite the advancement in technology and construction techniques, traditional clay bricks and their variants still dominate the market for their durability, affordability, and widespread availability.

But with inflation, fluctuating fuel prices, and varying demand, bricks rate in Pakistan are never static. For those planning construction in 2025, understanding the latest price trends and market factors is crucial. This guide explores the types of bricks, their latest rates across different regions, and tips to help you make an informed purchase.

Latest Bricks Rate in Pakistan (2025)

As of July 2025, the average brick rate per 1000 units in different cities of Pakistan is as follows:

Note: Prices may vary daily depending on fuel costs, labor availability, transport charges, and kiln production.

Types of Bricks Available in Pakistan

There are several types of bricks used in Pakistan depending on usage, budget, and structural requirements. Here’s a breakdown:

1. Burnt Clay Bricks (Awwal Brick / Class-A)

• Most commonly used.
• Baked in kilns at high temperatures.
• Strong, durable, reddish.
• Price: PKR 15,000 – 18,000 per 1000.

2. Class-B and Class-C Bricks

• Slightly lower in quality than Class-A.
• Often used in walls that will be plastered.
• Price: PKR 12,500 – 14,500 per 1000.

3. Fly Ash Bricks

• Made using fly ash, cement, and water.
• More common in urban or large construction projects.
• Lighter and more eco-friendly.
• Price: Varies from PKR 10 to 15 per brick depending on location.

4. Concrete Bricks / Blocks

• Used in commercial and load-bearing structures.
• Made from cement, sand, and aggregates.
• Price: PKR 45 – 60 per block (standard size).

5. Fire Bricks (Refractory Bricks)

• Used in furnaces, kilns, and fireplaces.
• Heat-resistant and costly.
• Price: PKR 70 – 120 per brick.

Factors Affecting Brick Prices in Pakistan

The bricks price in Pakistan fluctuates due to several important factors:

1. Fuel Prices

Bricks are typically baked in kilns that rely on coal, gas, or rubber tire fuel. Any increase in fuel prices has a direct impact on the cost of production.

2. Government Regulations

• Ban on old brick kilns that pollute the environment (e.g., clamp kilns).
• Shift towards zigzag kiln technology, which can increase or stabilize prices based on compliance.

3. Construction Demand

• High demand during the construction season (spring and autumn) causes prices to surge.
• Real estate booms or government housing schemes also impact prices.

4. Labor Costs

Labor shortages or wage hikes can push production costs up, especially in areas like Karachi and Islamabad.

5. Transportation

Bricks are heavy to transport. Prices vary depending on the distance between the kiln and the construction site.

6. Quality and Type

Naturally, high-quality Class-A bricks will cost more than lower-quality alternatives. Likewise, handmade bricks can be costlier due to their craftsmanship.

Regional Brick Rate Trends

Lahore and Central Punjab

• Dominated by traditional brick kilns using zigzag technology.
• A proximity to source kilns helps reduce transport costs.
• Consistent demand due to rapid urban development.

Karachi and Sindh

• Higher transportation and labor costs.
• Increased use of concrete blocks and fly ash bricks in modern housing.

Islamabad/Rawalpindi

• Prices are slightly higher due to regulatory compliance, high-end construction, and security standards.
• Demand from commercial sectors and elite housing societies.

Khyber Pakhtunkhwa and Balochistan

• Stable prices but can fluctuate with political or trade disruptions.
• Some reliance on bricks imported from Punjab.

How Many Bricks Are Required for Construction?

An average 5 Marla house (125 square yards) in Pakistan may require around 40,000 to 50,000 bricks, depending on design, number of floors, and boundary wall thickness.

A 10 Marla house might need 70,000 to 80,000 bricks, while a 1 Kanal house could consume over 100,000 bricks.

This means a change in per-1000-brick price by even PKR 500 can impact the total cost by tens of thousands of rupees.

Tips for Buying Bricks in Pakistan

Here’s how to ensure quality and get value for money:

1. Verify the Brick Quality

• Perform a drop test: Good bricks won’t break when dropped from 4–5 feet.
• Check uniformity: Bricks should have sharp edges and a consistent red or brown color.
• Water absorption test: Good-quality bricks absorb less than 20% of their weight in water.

2. Inspect Before Buying

Always visit the kiln or ask for a sample before placing a large order. Avoid bulk purchases without inspection.

3. Negotiate Transport Costs

Some kilns include transportation in the quote, others do not. Always clarify this beforehand.

4. Check for Moisture Content

Wet or freshly baked bricks might be weaker. Allow time for curing or ensure you’re buying fully baked (sun-dried and kiln-fired) bricks.

5. Compare Rates Locally

Brick prices can vary significantly within a city. Get 2–3 quotes from nearby kilns or suppliers.

6. Get a Written Quotation

To avoid price fluctuations, ask the dealer for a written agreement, especially if you’re booking in advance.

Government Efforts to Regulate Brick Kilns

To reduce air pollution and align with environmental standards, the Pakistani government has:

• Banned traditional clamp kilns in many provinces.
• Promoted zigzag kiln technology, which is more fuel-efficient and produces stronger bricks.
• Imposed fines for illegal kilns operating during smog season.
• Launched awareness campaigns among kiln owners for sustainability.

This shift, while initially increasing costs, is expected to improve brick quality and reduce long-term environmental damage.

Conclusion

Bricks remain the backbone of Pakistan’s construction industry, and their demand shows no sign of slowing down. Whether you are a builder, contractor, or an individual planning to construct your dream home, understanding the current bricks rate in Pakistan, types of bricks available, and smart buying practices can save you significant money and hassle.

Stay updated with local market trends, choose quality over just price, and always deal with verified suppliers. After all, a strong home begins with strong bricks.